Triple R filter elements

Triple R’s continuous investment in research and development delivers the highest standard of efficiency in oil filtration. Protecting your investments while boosting productivity.

Our filter elements are designed to cleanse industrial oils, removing everything from solid particles to water to sludge, varnish and oxidation residues. All within a single element - a Triple R unique, unmatched by any filter manufacturer worldwide.

A wide range to fit every application.

All Triple R filter elements are Multipass-tested and guarantee consistent and reproducible micron ratings and filtration efficiency. The filter element range comes in 4 sizes (30, 50, 100 and 300 size), in various filter materials from cellulose to polyester to PP, and in 2 different setups (standard setup or ‘double stage’ D-series setup).

The Triple R 3-stage filtration concept.

The axial flow creates a 114 mm thick filter buildup.
The combination of Triple R’s special cellulose material and the thickness of the element allows absorbing of water and sludge.
The lower part is compressed by a carton box, creating an even finer filter medium.

Big particles stay on top of the element.
Smaller particles are captured in the upper
non-compressed part.
The smallest particles are captured in the
lower compressed part

TIP: use Triple R to analyse your systems condition.

When you open the lid of our Triple R housings, you can look at the top of the filter element inside.
The outlook of the filter element and the type of contaminants present on the top allow to draw conclusion about your systems condition.

Flexibel sizing

Triple R offers a wide range of filter housings that run from 1 up to 6 filter elements.

That allows increasing the flow rate, and thus using Triple R for very large oil volumes and for achieving important flow rates, up to 60,0 l/min.
Download the overview here

Ask your Triple R representative for detailed information.

Triple R replacement filter element series.

M-series

	M-SERIES - 2µ absolute - ß2 >200
Model	M30	M50	M100-H114	M300-H114
Article nr.	TR-20230	TR-20330	TR-20430	TR-20520
Dimensions	Ø104 x H114	Ø143 x H114	Ø179 x H114	Ø303 x H114
Triple R Filter system	BU30E SE30-YT	BU50E SE50-YT	BU100/200/300E SE100 up to SE600 AL100, OSCA AL-series SU/SS102, SU/SS103	SS305

Features HIGH PERFORMANCE filter element. Meant for hydraulic oil and for systems requiring best possible particle filtration. Cleanliness level: NAS 6 - ISO 16/14/12 or better.			M100-H80	M300-H80
			TR-20560	TR-20530
			Ø179 x H80	Ø303 x H80
			SS104	SS306

E-series

	E-SERIES - 3µ absolute - ß3 >75
Model	E30	E50	E100-H114	E300-H114
Article nr.	TR-20270	TR-20370	TR-20470	TR-20510
Dimensions	Ø104 x H114	Ø143 x H114	Ø179 x H114	Ø303 x H114
Triple R Filter system	BU30E SE30-YT	BU50E SE50-YT	BU100/200/300E SE100 up to SE600 AL100, OSCA AL-series SU/SS102, SU/SS103	SS305

Features Engine oil. Lube oil. First stage filtration for hydraulic oil with a high dirt load.			E100-H80	E300-H80
			TR-20570	TR-20540
			Ø179 x H80	Ø303 x H80
			SS104	SS306

X-series

	X-SERIES - 5µ absolute - ß5 >75
Model	X30	X50	X100-H114	X300-H114
Article nr.	TR-25250	TR-25350	TR-25450	TR-20512
Dimensions	Ø104 x H114	Ø143 x H114	Ø179 x H114	Ø303 x H114
Triple R Filter system	BU30E SE30-YT	BU50E SE50-YT	BU100/200/300E SE100 up to SE600 AL100, OSCA AL-series SU/SS102, SU/SS103	SS305

Features: LONG LIFE filter element for engine oil. Special cellulose filter medium that allows higher dirt absorbing. Perfect for HIGH VISCOSITY oil (220 - 320 - 460 cSt oil)			X100-H80	X300-H80
			TR-20580	TR-20550
			Ø179 x H80	Ø303 x H80
			SS104	SS306

D & WG-series

	D-series - 2µ absolute - ß2 >75		WG-series
Model	D100	D300	WG100	DWG100
Article nr.	TR-20000	TR-20515	TR-25470	TR-25480
Dimensions	Ø179 x H114	Ø303 x H114	Ø179 x H114	Ø179 x H114
Triple R Filter system	BU100/200/300E SE100 up to SE600 AL100, OSCA AL-series SU/SS102, SU/SS103	SS305	BU100/200/300EW SE100WG up to SE600WG AL100WG, OSCA AL-WGseries SU102, SU103

	Features: 2µ absolute filter elements - for VERY CONTAMINATED OIL (water and solids). 2 stage build, with M-filter medium at the upper part and X-filter medium at the lower part. Separated by a non-woven disc, to protect the lower part in case of excessive water.		Features: 10µ and 5µ filter elements for water glycol fluids (WG). The DWG100 has a 2 stage build separated by a non-woven disc, for additional particle removal.

WE, WS & OS-series

	WE-100	WS-series		OS10
Model	WE100	WS10	WS20	OS10
Article nr.	TR-20450	TR-20101 - TR-20125	TR-20201 - TR-20225	TR-26500
Dimensions	Ø179 x H114	Ø68 x H250	Ø68 x H500	Ø70 x H250
Triple R Filter system	WD10, WS-WD	3WS20, 6WS20		OS-systems

Features	Water absorber Absorbs 900 ml water.	Water separator 1µ for oil < 46 cSt. 15µ for oil > 40 cSt. Separates water from oil, based on the coalescence principle.		Oil separator 1µ filter element. Separates oil from water, based on the oalescence principle.

Suction prefilters

	Suction pre-filters
Model	SE-series	OSCA-series	LL-series
Article nr.	TR-21461	TR-21200	TR-21000
Dimensions	Ø35 x H50	Ø112 x H151	Ø150 x H250
Triple R Filter system	SE-series	OSCA-series	LL-housing - OSCA-systems

	Metal mesh suction filter elements, washable - 80/100µ